一键打包脚本

runOhosApp-Mac-auto.sh

+#!/bin/bash
+#
+# Eazytec is pleased to support the open source community by making CPF-KMP-CMP available.
+# Copyright (C) 2026 Eazytec. All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+set -e
+
+# Record script start time
+START_TIME=$(date +%s)
+
+# ====================== [1. Default Configuration and Parameter Parsing] ======================
+DEFAULT_PLATFORM="ohosArm64"
+DEFAULT_TARGET_ID="127.0.0.1:5555"
+DEFAULT_BUNDLE_NAME="com.example.harmonyapp"
+DEFAULT_ABILITY_NAME="EntryAbility"
+LOCAL_OHOS_PATH=""
+
+usage() {
+    echo "Usage: $0 [options] [PLATFORM] [TARGET_ID]"
+    echo ""
+    echo "Parameters:"
+    echo "  PLATFORM      Build platform (default: $DEFAULT_PLATFORM)"
+    echo "  TARGET_ID     Device ID (default: $DEFAULT_TARGET_ID)"
+    echo ""
+    echo "Options:"
+    echo "  -M MODES      打包类型: debug | release | all (default: 交互选择)"
+    echo "  -m MODE       Build mode: debug or release (default: debug)"
+    echo "  -b BUNDLE     Set bundle name (current: $DEFAULT_BUNDLE_NAME)"
+    echo "  -a ABILITY    Set Ability name (current: $DEFAULT_ABILITY_NAME)"
+    echo "  -d MODE       Debug mode: debug or attach (default: attach)"
+    echo "  -p PATH       Set external OHOS project path (localOhosPath)"
+    echo "  -h            Show this help message"
+    echo ""
+    echo "Examples:"
+    echo "  $0 ohosArm64 127.0.0.1:5555"
+    echo "  $0 -M debug                    # 仅打 debug 包"
+    echo "  $0 -M release                  # 仅打 release 包"
+    echo "  $0 -M all                     # debug+release（默认可交互选择）"
+    echo "  $0 -b com.test.app -a MainAbility"
+    echo "  $0 -p /path/to/external/ohos/project"
+    exit 0
+}
+
+# Preset variables
+BUNDLE_NAME=$DEFAULT_BUNDLE_NAME
+ABILITY_NAME=$DEFAULT_ABILITY_NAME
+BUILD_MODE="debug"
+BUILD_MODES_SELECT=""   # 空表示打包前交互选择；可选 debug | release | all
+DEBUG_MODE="attach"
+RED='\033[0;31m'
+GREEN='\033[0;32m'
+NC='\033[0m'   # No Color
+# Parse options (supports options in any position, e.g. ohosArm64 62Q0226107024702 -m release)
+POSITIONALS=()
+while [[ $# -gt 0 ]]; do
+    case $1 in
+        -M) BUILD_MODES_SELECT="$2"; shift 2 ;;
+        -m) BUILD_MODE="$2"; shift 2 ;;
+        -b) BUNDLE_NAME="$2"; shift 2 ;;
+        -a) ABILITY_NAME="$2"; shift 2 ;;
+        -d) DEBUG_MODE="$2"; shift 2 ;;
+        -p) LOCAL_OHOS_PATH="$2"; shift 2 ;;
+        -h) usage ;;
+        -*)
+            echo "Unknown option: $1"
+            usage
+            ;;
+        *)
+            POSITIONALS+=("$1")
+            shift
+            ;;
+    esac
+done
+
+PLATFORM=${POSITIONALS[0]:-$DEFAULT_PLATFORM}
+TARGET_ID=${POSITIONALS[1]:-$DEFAULT_TARGET_ID}
+
+echo -e "\033[32m▶ Run environment configuration:\033[0m"
+echo "  - Platform: $PLATFORM"
+echo "  - Devices: from hdc list targets (see below)"
+echo "  - Build modes: 由 -M 或打包前选择 (debug / release / debug+release)"
+echo "  - Debug mode: $DEBUG_MODE"
+echo "  - Bundle: $BUNDLE_NAME"
+echo "  - Ability: $ABILITY_NAME"
+if [ -n "$LOCAL_OHOS_PATH" ]; then
+    echo "  - External OHOS path: $LOCAL_OHOS_PATH"
+fi
+echo "------------------------------------------------------------"
+
+# --- Configuration ---
+DEVECO_PATH="${DEVECO_PATH:-/Applications/DevEco-Studio.app}"
+MIN_VERSION="6.0.0"
+echo " DevEco Studio Path ${DEVECO_PATH}"
+echo "🔍 Checking environment configuration..."
+
+# 1. Check if DevEco exists
+if [ ! -d "$DEVECO_PATH" ]; then
+    echo "❌ Error: DevEco Studio not found at $DEVECO_PATH."
+    exit 1
+fi
+
+# 2. Get version (from Info.plist CFBundleShortVersionString)
+# Output example: 5.0.3.406
+CURRENT_VERSION=$(defaults read "$DEVECO_PATH/Contents/Info.plist" CFBundleShortVersionString)
+
+echo "Current DevEco version: $CURRENT_VERSION"
+echo "Minimum required version: $MIN_VERSION"
+CUR_MAJOR=$(echo "$CURRENT_VERSION" | cut -d. -f1)
+CUR_MINOR=$(echo "$CURRENT_VERSION" | cut -d. -f2)
+
+REQ_MAJOR=$(echo "$MIN_VERSION" | cut -d. -f1)
+REQ_MINOR=$(echo "$MIN_VERSION" | cut -d. -f2)
+
+if [ "$CUR_MAJOR" -lt "$REQ_MAJOR" ] 2>/dev/null || \
+   { [ "$CUR_MAJOR" -eq "$REQ_MAJOR" ] && [ "$CUR_MINOR" -lt "$REQ_MINOR" ]; }; then
+echo "-------------------------------------------------------"
+echo -e "${RED}⛔️ Error: DevEco version is too low!${NC}"
+echo -e "${RED}Current version: $CURRENT_VERSION${NC}"
+echo -e "${RED}Minimum required: $MIN_VERSION+${NC}"
+echo -e "${RED}Please upgrade DevEco Studio and run this script again.${NC}"
+echo "-------------------------------------------------------"
+exit 5
+fi
+
+echo "✅ DevEco version meets requirements ($CURRENT_VERSION)"
+# ====================== [2. Environment Path and SDK Configuration] ======================
+DEVECO_HOME="${DEVECO_HOME:-$DEVECO_PATH/Contents}"
+echo "✅  ($DEVECO_HOME)"
+HDC_BIN="$DEVECO_HOME/sdk/default/openharmony/toolchains/hdc"
+export DEVECO_SDK_HOME="$DEVECO_HOME/sdk"
+export PATH="$DEVECO_SDK_HOME:$DEVECO_HOME/jbr/Contents/Home/bin:$DEVECO_HOME/tools/node/bin:$DEVECO_HOME/tools/ohpm/bin:$DEVECO_HOME/tools/hvigor/bin:$PATH"
+
+# ====================== [2.5 Device List and Build Mode List] ======================
+SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+DEVICE_IDS=()
+while IFS= read -r line; do
+    line=$(echo "$line" | tr -d '\r' | xargs)
+    [ -n "$line" ] && DEVICE_IDS+=("$line")
+done < <("$HDC_BIN" list targets 2>/dev/null | awk '{if (NF>=1) print $1}')
+
+# 打包类型：未指定 -M 时交互选择
+if [ -z "$BUILD_MODES_SELECT" ]; then
+    echo ""
+    echo "请选择打包类型:"
+    echo "  1) 仅 debug"
+    echo "  2) 仅 release"
+    echo "  3) debug+release"
+    printf "请输入 [1/2/3，默认 3]: "
+    read -r BUILD_CHOICE
+    BUILD_CHOICE=${BUILD_CHOICE:-3}
+    case "$BUILD_CHOICE" in
+        1) BUILD_MODES_SELECT="debug" ;;
+        2) BUILD_MODES_SELECT="release" ;;
+        3|*) BUILD_MODES_SELECT="all" ;;
+    esac
+fi
+case "$(echo "$BUILD_MODES_SELECT" | tr '[:upper:]' '[:lower:]')" in
+    debug)   BUILD_MODES=(debug) ;;
+    release) BUILD_MODES=(release) ;;
+    all|*)   BUILD_MODES=(debug release) ;;
+esac
+
+if [ ${#DEVICE_IDS[@]} -eq 0 ]; then
+    echo -e "\033[31mError: No device found. Run 'hdc list targets' to check connected devices.\033[0m"
+    exit 5
+fi
+echo "Devices: ${DEVICE_IDS[*]}"
+echo "Build modes: ${BUILD_MODES[*]}"
+echo "------------------------------------------------------------"
+
+TOTAL_COUNT=0
+SUCCESS_COUNT=0
+set +e
+for TARGET_ID in "${DEVICE_IDS[@]}"; do
+for BUILD_MODE in "${BUILD_MODES[@]}"; do
+((TOTAL_COUNT++))
+echo ""
+echo "$TARGET_ID 设备 $BUILD_MODE 模式 进行打包"
+
+# 每次打包前：先删除 entry/builds、entry/libs/arm64_v8a、entry/libs/x86_64，删除后检测，确认无 HAP 与 libs 中间产物后再进行打包（含第一次）
+ENTRY_BASE="$SCRIPT_DIR/harmonyApp/entry"
+CHECK_BASE="$SCRIPT_DIR/harmonyApp"
+HAP_PATH="$CHECK_BASE/entry/build/default/outputs/default/entry-default-signed.hap"
+LIBS_ARM="$CHECK_BASE/entry/libs/arm64_v8a"
+LIBS_X86="$CHECK_BASE/entry/libs/x86_64"
+
+DEL_RETRY=0
+while true; do
+    rm -rf "$ENTRY_BASE/builds"
+    rm -rf "$ENTRY_BASE/libs/arm64_v8a"
+    rm -rf "$ENTRY_BASE/libs/x86_64"
+    HAP_EXISTS="无"; [ -f "$HAP_PATH" ] && HAP_EXISTS="有"
+    LIBS_EXISTS="无"; [ -d "$LIBS_ARM" ] || [ -d "$LIBS_X86" ] && LIBS_EXISTS="有"
+    if [ "$HAP_EXISTS" = "无" ] && [ "$LIBS_EXISTS" = "无" ]; then
+        echo -e "\033[35m删除后检测: HAP包=无, libs中间产物=无，已确认清理完成\033[0m"
+        break
+    fi
+    DEL_RETRY=$((DEL_RETRY + 1))
+    if [ $DEL_RETRY -ge 5 ]; then
+        echo -e "\033[35m删除后检测: HAP包=${HAP_EXISTS}, libs中间产物=${LIBS_EXISTS}，清理未完全，继续打包\033[0m"
+        break
+    fi
+    sleep 1
+done
+
+# 当前设备先卸载应用，再打包安装
+"$HDC_BIN" -t "$TARGET_ID" shell bm uninstall -n "$BUNDLE_NAME" >/dev/null 2>&1 || true
+"$HDC_BIN" -t "$TARGET_ID" shell aa force-stop "$BUNDLE_NAME" >/dev/null 2>&1 || true
+
+# ====================== [3. Gradle Build] ======================
+if [ "$PLATFORM" = "ohosArm64" ]; then
+    if [ "$BUILD_MODE" = "release" ]; then
+        if [ -n "$LOCAL_OHOS_PATH" ]; then
+            ./gradlew :composeApp:publishReleaseBinariesToHarmonyApp -PharmonyAppPath="$LOCAL_OHOS_PATH"
+        else
+            ./gradlew :composeApp:publishReleaseBinariesToHarmonyApp
+        fi
+    else
+        if [ -n "$LOCAL_OHOS_PATH" ]; then
+            ./gradlew :composeApp:publishDebugBinariesToHarmonyApp -PharmonyAppPath="$LOCAL_OHOS_PATH"
+        else
+            ./gradlew :composeApp:publishDebugBinariesToHarmonyApp
+        fi
+    fi
+elif [ "$PLATFORM" = "iosSimulatorArm64" ]; then
+    ./gradlew :composeApp:linkDebugFrameworkIosSimulatorArm64
+else
+    echo "错误的 $TARGET_ID 设备 $BUILD_MODE 模式"
+    continue
+fi
+# SO packaging end time
+HAP_START_TIME=$(date +%s)
+# --- Subsequent install logic (hdc install etc.) ---
+# ====================== [4. HAP Package Build] ======================
+# Switch to harmonyApp directory for subsequent OHOS commands
+# Use external path if specified, otherwise use default harmonyApp directory
+if [ -n "$LOCAL_OHOS_PATH" ]; then
+    HARMONY_APP_DIR="$LOCAL_OHOS_PATH"
+else
+    HARMONY_APP_DIR="harmonyApp"
+fi
+
+if [ ! -d "$HARMONY_APP_DIR" ]; then
+    echo "错误的 $TARGET_ID 设备 $BUILD_MODE 模式"
+    continue
+fi
+cd "$HARMONY_APP_DIR"
+ohpm install --all
+node "$DEVECO_HOME/tools/hvigor/bin/hvigorw.js" --sync -p product=default -p buildMode="$BUILD_MODE" --analyze=normal --parallel --incremental --daemon
+if [ "$BUILD_MODE" = "release" ]; then
+    node "$DEVECO_HOME/tools/hvigor/bin/hvigorw.js" --mode module -p module=entry -p product=default -p buildMode=release -p requiredDeviceType=phone assembleHap compileNative --analyze=normal --parallel --incremental --daemon
+else
+    node "$DEVECO_HOME/tools/hvigor/bin/hvigorw.js" --mode module -p module=entry@default -p product=default -p buildMode=debug -p requiredDeviceType=phone assembleHap --analyze=normal --parallel --incremental --daemon
+fi
+
+# ====================== [5. Install and Push Debug Components] ======================
+AVAILABLE_TARGETS=$("$HDC_BIN" list targets)
+HAP_DIR="./entry/build/default/outputs/default"
+SIGNED_HAP="entry-default-signed.hap"
+HAP_FILE="$HAP_DIR/$SIGNED_HAP"
+# Check if signed HAP package exists
+if [ ! -f "$HAP_FILE" ]; then
+    echo "错误的 $TARGET_ID 设备 $BUILD_MODE 模式"
+    cd "$SCRIPT_DIR"
+    continue
+fi
+if ! echo "$AVAILABLE_TARGETS" | grep -q "$TARGET_ID"; then
+    echo "错误的 $TARGET_ID 设备 $BUILD_MODE 模式"
+    cd "$SCRIPT_DIR"
+    continue
+fi
+
+# Install HAP (using temp directory)
+REMOTE_HAP_DIR="/data/local/tmp/debug_install"
+"$HDC_BIN" -t "$TARGET_ID" shell mkdir -p "$REMOTE_HAP_DIR" >/dev/null 2>&1
+"$HDC_BIN" -t "$TARGET_ID" file send "$HAP_FILE" "$REMOTE_HAP_DIR" >/dev/null 2>&1
+
+INSTALL_OUTPUT=$("$HDC_BIN" -t "$TARGET_ID" shell bm install -p "$REMOTE_HAP_DIR/$SIGNED_HAP" 2>&1)
+sleep 1
+INSTALL_RESULT=$?
+if echo "$INSTALL_OUTPUT" | grep -qE "failed"; then
+    "$HDC_BIN" -t "$TARGET_ID" shell bm uninstall -n "$BUNDLE_NAME" >/dev/null 2>&1 || true
+    sleep 5
+    INSTALL_OUTPUT=$("$HDC_BIN" -t "$TARGET_ID" shell bm install -p "$REMOTE_HAP_DIR/$SIGNED_HAP" 2>&1)
+    sleep 5
+fi
+# ====================== [6. App Launch and Debug Mount] ======================
+"$HDC_BIN" -t "$TARGET_ID" shell rm -rf "$REMOTE_HAP_DIR" >/dev/null 2>&1
+sleep 1
+
+# Step 1: Start app (with -D if debug mode enabled)
+if [ "$DEBUG_MODE" = "debug" ]; then
+    AA_START_OUTPUT=$("$HDC_BIN" -t "$TARGET_ID" shell aa start -a "$ABILITY_NAME" -b "$BUNDLE_NAME" -D 2>&1)
+else
+    AA_START_OUTPUT=$("$HDC_BIN" -t "$TARGET_ID" shell aa start -a "$ABILITY_NAME" -b "$BUNDLE_NAME" 2>&1)
+fi
+# Package push complete time
+END_TIME=$(date +%s)
+
+AA_START_RESULT=$?
+# Check if screen lock error
+if echo "$AA_START_OUTPUT" | grep -q "10106102\|screen is locked"; then
+    echo "错误的 $TARGET_ID 设备 $BUILD_MODE 模式"
+    cd "$SCRIPT_DIR"
+    continue
+fi
+
+# Step 2: Get app PID
+get_pid_func() {
+    "$HDC_BIN" -t "$TARGET_ID" shell "pidof $BUNDLE_NAME" 2>/dev/null | tr -d '\r' | tr -d '\n' | awk '{print $1}'
+}
+
+MAX_WAIT=20
+COUNT=0
+APP_PID=""
+while [ $COUNT -lt $MAX_WAIT ]; do
+    APP_PID=$(get_pid_func)
+    if [[ "$APP_PID" =~ ^[0-9]+$ ]]; then
+        break
+    fi
+    sleep 1
+    let COUNT=COUNT+1
+done
+
+if [ -z "$APP_PID" ]; then
+    echo "错误的 $TARGET_ID 设备 $BUILD_MODE 模式"
+    cd "$SCRIPT_DIR"
+    continue
+fi
+
+echo "$TARGET_ID 设备 $BUILD_MODE 模式 打包成功"
+((SUCCESS_COUNT++))
+
+# Return to project root for next iteration (Gradle runs from project root)
+cd "$SCRIPT_DIR"
+done
+done
+set -e
+
+# ====================== [7. Packing Result Statistics] ======================
+echo ""
+echo "=============================================="
+echo -e "\033[32m▶ 打包结果统计 / Packing Result Summary\033[0m"
+echo "=============================================="
+echo "  总次数 Total:     $TOTAL_COUNT"
+echo "  推包成功 Success: $SUCCESS_COUNT"
+if [ "$TOTAL_COUNT" -gt 0 ]; then
+    RATE_PCT=$((SUCCESS_COUNT * 100 / TOTAL_COUNT))
+    echo "  通过率 Rate:      ${SUCCESS_COUNT}/${TOTAL_COUNT} = ${RATE_PCT}%"
+else
+    echo "  通过率 Rate:      N/A"
+fi
+echo "=============================================="
+echo ""
\ No newline at end of file